Creating Flutter Applications for Zebra Android Devices with DataWedge

Darryn Campbell -
5 MIN READ

This article describes how to interface to Zebra's DataWedge service from a Flutter application.

Updated January 2021

For expediency, familiarity with Zebra's DataWedge tool as well as the DataWedge profile mechanism is assumed. For an overview of DataWedge, please refer to the DataWedge Techdocs page. The sample project will use DataWedge to capture data as well as the DataWedge API to configure a profile and control the scanner with a button on the UI. The sample does not demonstrate the full capabilities of DataWedge through Flutter, see 'not covered by the sample', below.

Prerequisites

You need to have Flutter installed in order to run the sample. The process is fairly straight forward and there are abundant resources out there to help you get Flutter configured on your system

Install flutter
>flutter run
Optionally: Configure the Flutter SDK in Android Studio and run your application from there

Sample Application

The sample application, available from https://github.com/ZebraDevs/DataWedge-Flutter-Demo, draws heavily on the official Flutter sample for "platform_channel" as well as the approach followed by the previously mentioned 3rd party Flutter EMDK sample. Because the native code is written in Kotlin I also re-used a lot of the code I previously wrote for my DataWedge Kotlin sample.

The sample works as follows:

  • A MethodChannel is used to invoke the DataWedge API to instruct DataWedge to do things, e.g. SOFT_SCAN_TRIGGER. Only a couple of methods are used by this demo app but there are about 30 APIs available in DataWedge.
  • An EventChannel is used to receive data back from DataWedge. This demo only receives scans but this channel could also be used to parse return values from the asynchronous DataWedge APIs, e.g. GET_VERSION.

Sample application

As can be seen from the picture, the last scanned barcode is displayed and a scan can be initiated with the blue SCAN button.

User Interface (Dart) code to receive data (e.g. scans) from DataWedge

Scanned data will be received from the native (Kotlin) layer over an EventChannel as a stringified JSON object. This seemed the easiest way to pass an object over the EventChannel rather than try to get Dart to understand my Kotlin class. Set up the EventChannel and declare an onEvent listener to update the UI when a barcode is scanned.

static const EventChannel scanChannel = 
  EventChannel('com.darryncampbell.datawedgeflutter/scan');

@override
void initState() {
  super.initState();
  scanChannel.receiveBroadcastStream().listen(_onEvent, onError: _onError);
}

void _onEvent(Object event) {
  setState(() {
    Map barcodeScan = jsonDecode(event);
    _barcodeString = "Barcode: " + barcodeScan['scanData'];
    _barcodeSymbology = "Symbology: " + barcodeScan['symbology'];
    _scanTime = "At: " + barcodeScan['dateTime'];
  });
}

Native (Kotlin) code to handle scans received from DataWedge

Scan data is received from DataWedge as a Broadcast Intent. A DataWedge profile (created automatically - see later) is required to configure DataWedge to send this broadcast intent. The native code will create the broadcast receiver and when a broadcast is received from a scan, it is sent to the UI (Dart) code over the EventChannel.

private val PROFILE_INTENT_ACTION = "com.darryncampbell.datawedgeflutter.SCAN"
private val SCAN_CHANNEL = "com.darryncampbell.datawedgeflutter/scan"

EventChannel(flutterEngine.dartExecutor, SCAN_CHANNEL).setStreamHandler(
    object : StreamHandler {
        private var dataWedgeBroadcastReceiver: BroadcastReceiver? = null
        override fun onListen(arguments: Any?, events: EventSink?) {
            dataWedgeBroadcastReceiver = createDataWedgeBroadcastReceiver(events)
            val intentFilter = IntentFilter()
            intentFilter.addAction(PROFILE_INTENT_ACTION)
            registerReceiver(
                dataWedgeBroadcastReceiver, intentFilter)
        }

        override fun onCancel(arguments: Any?) {
            unregisterReceiver(dataWedgeBroadcastReceiver)
            dataWedgeBroadcastReceiver = null
        }
    }
)

Received barcodes are parsed from the Intent into a 'Scan' object. The stringified JSON representation of this Scan is sent over the EventChannel.

private fun createDataWedgeBroadcastReceiver(events: EventSink?): BroadcastReceiver? {
    return object : BroadcastReceiver() {
        override fun onReceive(context: Context, intent: Intent) {
            if (intent.action.equals(PROFILE_INTENT_ACTION))
            {
                //  A barcode has been scanned
                var scanData = intent.getStringExtra(DWInterface.DATAWEDGE_SCAN_EXTRA_DATA_STRING)
                var symbology = intent.getStringExtra(DWInterface.DATAWEDGE_SCAN_EXTRA_LABEL_TYPE)
                var date = Calendar.getInstance().getTime()
                var df = SimpleDateFormat("dd/MM/yyyy HH:mm:ss")
                var dateTimeString = df.format(date)
                var currentScan = Scan(scanData, symbology, dateTimeString);
                events?.success(currentScan.toJson())
            }
            //  Could handle return values from DW here such as RETURN_GET_ACTIVE_PROFILE
            //  or RETURN_ENUMERATE_SCANNERS
        }
    }
}

User Interface (Dart) code to send commands to DataWedge

The MethodChannel is used to send instructions to DataWedge. The DataWedge API contains APIs which take a range of parameters, from simple Strings to complex nested Bundle structures. There may have been a better way to do this but invokeMethod can only take a single argument type so to exchange two strings I converted them to a stringified JSON object.

The demo code also handles profile creation (not shown below) which is done entirely in the native code rather than try to exchange the nested bundle structure between Dart and Kotlin.

static const MethodChannel methodChannel =
    MethodChannel('com.darryncampbell.datawedgeflutter/command');

Future sendDataWedgeCommand(String command, String parameter) async {
  try {
    String argumentAsJson = "{\"command\":$command,\"parameter\":$parameter}";
    await methodChannel.invokeMethod(
          'sendDataWedgeCommandStringParameter', argumentAsJson);
  } on PlatformException {
    //  Error invoking Android method
  }
}

Handler for the onTouchDown event, initiate the scan when the button is pressed. Calls the above function with the appropriate DataWedge API command and parameter.

void startScan() {
  setState(() {
    sendDataWedgeCommand(
        "com.symbol.datawedge.api.SOFT_SCAN_TRIGGER", "START_SCANNING");
  });
}

Native (Kotlin) code to send commands to DataWedge

Parse the commands and determine which DataWedge API to call. All DataWedge APIs are invoked by sending a Broadcast Intent to a pre-defined Action which the DataWedge service is always listening for.

MethodChannel(flutterEngine.dartExecutor, COMMAND_CHANNEL).setMethodCallHandler { call, result ->
    if (call.method == "sendDataWedgeCommandStringParameter")
    {
        val arguments = JSONObject(call.arguments.toString())
        val command: String = arguments.get("command") as String
        val parameter: String = arguments.get("parameter") as String
        sendCommandString(applicationContext, command, parameter)
    }
    else {
        result.notImplemented()
    }
}

fun sendCommandString(context: Context, command: String, parameter: String) {
    val dwIntent = Intent()
    dwIntent.action = "com.symbol.datawedge.api.ACTION"
    dwIntent.putExtra(command, parameter)
    context.sendBroadcast(dwIntent)
}

DataWedge Configuration

As previously mentioned, although the Flutter application is listening for broadcast Intents, DataWedge needs to be configured to send the appropriate Intent whenever a barcode is scanned. The sample app will do this automatically with a combination of the CREATE_PROFILE and SET_CONFIG APIs provided your version of DataWedge is 6.4 or higher.

If for whatever reason the profile is not automatically created you can do so manually by launching DataWedge on the device and matching the screenshots below to define the DataWedgeFlutterDemo profile.

DataWedge configuration
DataWedge configuration
DataWedge configuration
DataWedge configuration

Not covered by the sample

The sample is designed to only show the basics of capturing data in a Flutter app on a Zebra Android device.

Many of the DataWedge APIs return values back to the application, for example GET_VERSION but none of those APIs are shown in this demo. You can reuse the existing EventChannel for this purpose.

Some of the DataWedge APIs take complex data types like SET_CONFIG APIs. Ideally you could define these complex structures in Dart and send them over the MethodChannel... this may well be possible (This Medium article on Flutter Platform Channels talks about BinaryMessages) but it is much simpler to define these entirely in Kotlin, especially since other apps already exist which show how to call the APIs from Kotlin.

profile

Darryn Campbell

Please Register or Login to post a reply

1 Replies

K Kala Mozer

Thank for your guide, I creating flutter applications zebra on my android device step by step and that's successful geometry dash 2.2