Good morning,

I have a ZPL file that with each print I make, it adds 1mm to the top, causing the print to come off the label. If, for example, I make 5 prints, it shifts 5mm to the label, thus printing outside of it and becoming ineligible.

Can you help me?



^XA 
^MNN^LL216 
^MD10 
^FO50,70^GD100,40,30,,R^FS 
^FO50,108^GD100,40,30,,L^FS 
^FO8,200^AB,7,7^FDDENTRO DO CORPO DE PROVA^FS 
^FO150,100 
^FO300,10^ADB,12,7^FD BARAO GERALDO ^FS 
^FO360,50^ADB,70,40^FD07^FS 
^FO430,80^ADB,11,11^FDDIAS^FS 
^FO450,80^ADB,35,20^FD^FS 
^FO470,50^ADN,10,15^FDOP:16027575^FS 
^FO535,80^ADN,10,10^FDROMPER DIA^FS 
^FO500,110^ADN,15,15^FD02/11/20^FS 
^FO500,135 
^BY2^BCN,40,Y,N^FD>;1602757510^FS 
^FO100,100^GB150,0,15^FS 
^FO250,50^GB0,120,20^FS 
^XZ 
^XA 
^MNN^LL216 
^MD10 
^FO50,70^GD100,40,30,,R^FS 
^FO50,108^GD100,40,30,,L^FS 
^FO8,200^AB,7,7^FDDENTRO DO CORPO DE PROVA^FS 
^FO150,100 
^FO300,10^ADB,12,7^FD BARAO GERALDO ^FS 
^FO360,50^ADB,70,40^FD28^FS 
^FO430,80^ADB,11,11^FDDIAS^FS 
^FO450,80^ADB,35,20^FD^FS 
^FO470,50^ADN,10,15^FDOP:16027575^FS 
^FO535,80^ADN,10,10^FDROMPER DIA^FS 
^FO500,110^ADN,15,15^FD23/11/20^FS 
^FO500,135 
^BY2^BCN,40,Y,N^FD>;1602757520^FS 
^FO100,100^GB150,0,15^FS 
^FO250,50^GB0,120,20^FS 
^XZ 
^XA 
^MNN^LL216 
^MD10 
^FO50,70^GD100,40,30,,R^FS 
^FO50,108^GD100,40,30,,L^FS 
^FO8,200^AB,7,7^FDDENTRO DO CORPO DE PROVA^FS 
^FO150,100 
^FO300,10^ADB,12,7^FD BARAO GERALDO ^FS 
^FO360,50^ADB,70,40^FD56^FS 
^FO430,80^ADB,11,11^FDDIAS^FS 
^FO450,80^ADB,35,20^FD^FS 
^FO470,50^ADN,10,15^FDOP:16027575^FS 
^FO535,80^ADN,10,10^FDROMPER DIA^FS 
^FO500,110^ADN,15,15^FD21/12/20^FS 
^FO500,135 
^BY2^BCN,40,Y,N^FD>;1602757530^FS 
^FO100,100^GB150,0,15^FS 
^FO250,50^GB0,120,20^FS 
^XZ