is it possible to define IP routes on an RFS7000 and specify the metric for each route??  here is why I ask: we have a customer who wants to dual-home an RFS7000 so in case one Ethernet Switch fails, the RFS would have another path to the network. they do have a redundant RFS at a 'redundant site".  the goal for dual-homing is to eliminate any un-neccessary failover. this is more complicated than the normal L2 dual homing because the RFS now  requires two IP addresses, one on each GE-port that are connected to different switches.  since it is Layer-3 and  the RFS does not participite in any routing protocols (OSPF, EIGRP, etc..) so it needs to have two default-gateways with different metrics.  but i can not find any way to specify the "metric" for an IP route on an RFS. on a PC it's done by a ROUTE command: C:\>route add 0.0.0.0 mask 0.0.0.0 10.5.88.212 metric 99 this results in two default gateways with different metrics:: Network Destination        Netmask          Gateway       Interface  Metric           0.0.0.0          0.0.0.0      10.5.88.212     10.5.88.212       99           0.0.0.0          0.0.0.0      10.5.95.254     10.5.88.212       25 thanks, afshin