Hi, Team. I'm using WiNG5.1-074R, RFS4000 with AP-650 dual radio (internal antenna). Radio 1 is set to 2.4Ghz, channel 6 (Smart RF), off-channel scan disabled. Radio 2 is set to off In Statistiscs-> AP detection I can see APs on channel 1 and 11. These channels do not overlap with channel 6, and off-channel scan is disabled - why do I see them?
AP Detection in WiNG5 keeps seing things// Expert user has replied. |
1 Replies
OK, the culprit was SMART RF. Apparently, when it scans the channels to determine the best one, the collected data is also submitted to AP detection. Good one! :) Removing SMART RF policy and setting static channel helped to cure APs visions :) Thanks to EMEA Tech support who pushed this quick to the BU and back!