The ET1 JB uses MTP and PTP to connect to a PC. We have noticed that both modes do not work properly if there are too many files on the SD card (by many, we mean hundred of thousands). In that case, files are visibles on the SD card if we use the ET1 file browser; but they are not visibles on PC. And many failures arise if we try to copy a new file from PC to the ET1. We've tried several ways: toggling the MTP/PTP modes; unmount/remount the SD card; reboot the tablet. We also tried to connect the ET1 to another PC, without success.
Is there a way to recover the USB-Mass Storage mode? Or any other solution to make MTP/PTP properly working in presence of many files?
Recover the USB-Mass Storage mode in ET1-JB |
2 Replies
The fraction of the landscape occupied by such lower sections, or FTOPO, was applied to concave portions of the landscape (i.e., lower and depressional landscape positions) where soils are likely to be saturated for significant periods of time on a regular basis and soils are imperfectly and poorly drained with mottles41 within 50 cm of the land surface.
via: https://depressionals.com
Try unchecking both the MTP and PTP modes, this makes the device return to USB Mass Storage mode