Hi,

I am trying to print label on 3 column labels but I am unable to adjust its height using zpl. After doing some research I found out that zpl doesnt have any specific command for column separation you just need to print them sequential. So I did that and was successful in print the labels. The width is not a problem at the moment but the height is causing issues. The labels are printed on alternative rows as you can see in the image below.

The Label width is 28*19mm, and the  information I was able to get from testing is:
Label Width: 224 (28 mm)
Distance Between Labels in dots: 15
Label One X = 0, Label 2 X = 239, Label 3 X = 478

Here is the zpl command that I am using:
^XA^MMC^PW711^LL0152^LS0^FO0,20^A0N,28^FDTest Message^FS^FO240,20^A0N,28^FDTest Message 2^FS^FO478,20^A0N,28^FDTest Message 3^FS^XZ
Please advise. Thank you.